Filter Lamp Reset; On/Off Timer - Fujitsu AIRSTAGE UTY-RNK Serie Manual De Funcionamiento

FILTER LAMP RESET

Some indoor unit models are equipped with a filter lamp in the indoor unit display to indicate when it is time to clean the air
filters.
Press the Filter button for 2 seconds or more. The indoor unit filter lamp will go off and the filter display will disappear.

ON/OFF TIMER

Instructions related to heating are applicable to "HEAT PUMP MODELS" and "HEAT RECOVERY MODELS" only.
The timer function is not available depending on the model.
To set the ON/OFF timer
1
No display
NON OFF
STOP TIMER
G To cancel the timer mode
• Press the TIMER DELETE button to cancel the timer mode.
• The timer mode can also be canceled by changing the timer mode using the TIMER MODE button.
En-5
Press the TIMER MODE button to
select the ON timer or OFF timer.
It is switched every time as shown
in the below diagram when the
button is pressed.
ON WEEKLY
TIMER TIMER
2
From 1 to 24 hours
Press the SET TIME buttons to set the time.
After the time is set, the timer will start automatically.
The amount of time until the OFF timer operates that is dis-
played on the timer display decreases as time passes.
SU MO TU WE TH FR SA
ex. OFF timer set for 6 hours