General Information - Ardo Single Pumpset Instrucciones De Uso

en
9. Choice of breast shell and
Optiflow massage insert
If your nipple rubs uncomfortably on the inner side
of the funnel, use a larger breast shell (breast shell
insert). If the areola is also sucked into the funnel,
use a smaller breast shell. The Optiflow can only be
used with the 31 mm breast shell.
10. Storage of breast milk
Recommended storage time at room temperature: 3–4 hours at 16–29°C (60–85°F); in the refrigerator:
3 days at ≤4°C (39°F); in freezing compartment with door: 6 months to 1 year at <-17°C (0°F)
11. Possible problems and troubleshooting
Weak or no vacuum:
• Ensure that the pumpset has been correctly assembled and is not damaged.
• Check whether the lip valve is cracked or stuck together.
• Check whether the flexible membrane pot is intact and the smooth side is facing outwards.
• Make sure that the adapter tube cover seals well.
Pain when pumping:
• Ensure that the nipple is in the middle of the breast shell.
• Check that the breast shell size fits your nipples.
• Check that the vacuum intensity is not set too high.
• Seek professional help if problems persist.

12. General information

The accessory pumpset is an applied part of Ardo breastpumps. Lifetime of the pumpset: 400 hours or
sterilised a maximum of 50 times.
Materials: Polypropylene (PP) / silicone
Temperature: Operation +5°C (41°F) to +40°C (104°F) /
Transport -20°C (-4 F°) to +50°C (122°F)
Disposal: Can be safely disposed of in compliance with local
regulations.
Packaging: Caution, fragile
Preferably store Optiflow in a dark place (silicone).
6
Aktualisierungsstand Gebrauchs.info Dezember 2017
zur Verfügung gestellt von Gebrauchs.info
Relative humidity: 20–95%
Air pressure: 700–1060 hPa
Keep packaging away from
heat
Keep packaging away from
moisture