Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
1. Connect the small end of the DC power cord to the cooler.
2. Start the vehicle's engine.
3. Plug the large end of the DC power cord into the vehicle's cigarette lighter
socket firmly.
4. Choose heat or cool mode with the power switch.
5. The red light will light for warming, and the green light will light for cooling.
COOLER MODE
It will take about 30 minutes to reach the maximum cooling temperature of
approximately 35 ˚F below ambient temperature. Items can be placed in the
cooler pre-chilled to assist in reaching the lowest temperature as quickly as
possible. The cooler will continue to operate as long as power is supplied.
Contents will stay cool for some time after the unit is disconnected or turned
off, however, the temperature will rise to that of the surrounding air over time.
Exercise normal cautions that you would for any food in a cooling device. The
appliance is not designed for storing ice or open containers of liquids.
WARMER MODE
It will take about 60 minutes to reach the maximum warming temperature of
approximately 140 ˚F. It is recommended that items placed in the warmer be
pre-heated to assist in reaching the maximum temperature as quickly as possible.
The warmer will continue to operate as long as power is supplied. A built-in
thermostat will cycle the unit on and off to prevent overheating. Contents will
stay warm for some time after the unit is disconnected or turned off, however the
temperature will drop to that of the surrounding air over time.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User's Manual—Read before using this equipment
©2014 Wagan Corporation. All Rights Reserved.
4
Publicidad
Tabla de contenido
