Troubleshooting - Hotpoint Ariston OK 1037ELDP.20 X/HA S Manual De Instrucciones

Do not place
GB
or rest anything
on the open door

Troubleshooting

Problem
The "Clock button" and the
digits on the display flash.
A programmed cooking mode
does not start.
Only the high luminosity
"Clock button" is lit.
An automatic mode has been
selected. "Hot" appears on the
display and cooking does not
start.
Fan-assisted cooking has been
selected and the food looks burnt.
NOTICE
Make sure that the racks
and dripping pans have been
inserted fully before closing the door
Possible cause
The appliance has just been
connected to the electricity mains
or there has been a blackout.
There has been a blackout.
The appliance is in standby mode Press any button to exit
The temperature inside the oven
is higher than the suggested
value for the selected mode.
Positions 1 and 5: the direct
heat could cause
temperature-sensitive
foods to burn.
Please read the manual
carefully for information
regarding the automatic
cleaning (pyrolytic) cycle
Solution
Set the clock.
Reprogram the cooking mode.
standby mode.
Wait for the oven to cool down.
We recommend switching
dripping pan positions halfway
through cooking.
GB
41