Technical Specifications - TRAPP ES-450 Manual De Instrucciones

ES-450E
Type of
Model
Motor
ES-450E
Electrical
Note: The machines come out from the factory with the switch (On/Off) and electric motor connection, being at the
customer's discretion connecting it in the desired voltage, as available in the region. The motor connection scheme is made
available in the motor itself, so that the customer may proceed with the connection.
Note: TRAPP makes no warranty for the motor being damaged due to reversed or wrong connection, as described in the manual.
ES-450G
Type of
Model
Motor
E
Gasoline
S-450G
ES-450 (motorless)
This model is shipped without motor, but its base allows to adapt an electric motor and, for gasoline-
powered motors, you need to purchase and install a universal base for the shredder.
Type of
Model
Motor
Electrical
ES-450
Gasoline
Diesel
To set the drive pulley to be used, calculate: shredder pulley diameter multiplied by shredder rotation as
shown above, divided by the rotation speed specified on the motor plate to be used.
Formula: Pulley dia. x Shredder rotation -> (Table above)
Example: If motor is 4 pole (1,750 rpm)
Note: The machine production may range according to humidity and type or material, as well as the work and the
equipment conditions.
42

Technical Specifications

Power Voltage
127/220 V
3 cv
220/380 V
Oil Crankcase
Power
type capacity
6.5 HP
(Briggs & 0.6 liters
Stratton)
20W 50
7 HP
0.5 liters
(TRAPP /
LIFAN)
Power Voltage
127/220 V Single-phase
3 - 5 HP
(2 poles)
220/380 V Three-phase
6 - 9 HP -
5 - 8 HP -
Rotation of motor to be used
200 x 1,600
=
1,750
Disk Disk
Type rpm rpm
50 Hz 60 Hz
Single-phase
1,350 1,600
Three-phase
Tank Disk
capacity rpm
3 liters
1,600
3.6 liters
rpm rpm
Type
50 Hz 60 Hz
1,350 1,600
- - -
- - -
320,000
= 182 mm (motor pulley's diameter)
1,750
www.trapp.com.br
Green feed
Cutting
Production kg/h
length
Hay
5 mm 1,400
10 mm 1,800
Green feed Production kg/h
Cutting
length
Hay
5 mm 1,400
10 mm 1,800
5 mm 1,400
10 mm 1,800
Green feed
Cutting
Production kg/h
rpm
length
Hay
5 mm 1,400
1,600
10 mm 1,800
5 mm 1,400
1,600
10 mm 1,800
5 mm 1,400
1,600
10 mm 1,800
Sugarcane
2,500
3,600
Sugarcane
2,500
3,600
2,500
3,600
Sugarcane
2,500
3,600
2,500
3,600
2,500
3,600