Koenic KBT 100-T Manual De Instrucciones página 11

Charging the product
Make sure that the product is fully charged
before first use.
Caution
Never use other charging adapter which is
not sold with this product.
1. Connect the charging adapter to the DC IN
socket on the charging stand.
2. Connect the changing adapter to a suitable
power outlet.
3. Put the product on the charging station.
Note
Make sure that the product is switched off
before charging.
4. The charge indicator on the front of the
charging stand illuminates red.
5. The charge indicator turns off after
completion of the charging process.
6. Unplug the adapter from the power outlet.
Cutting with comb attachment
Slide the comb attachment on the blades and
make sure it is locked into place.
Cutting without comb attachment
Pull the comb attachment off from the blades.
Caution
The blade is sharp!
Using the product and cutting oil
1. Slide the ON/OFF switch forward to switch
the product on.
Slide the ON/OFF switch backward to
switch the product off.
2. If the blade is not aligned well, put a few
drops of lubricating oil onto the blades.
Allow the appliance to run for a few
seconds.
KBT100_A5_130626.indb 11
1
3
5
With comb
attachment
1
English
2
4
6
Without comb
attachment
2
11
5/7/13 3:21 PM