Kinetico 2020c Manual Del Usuario página 13

By–pass
There may be times when you need to shut off the water supply to your
entire house. To do this, set the by–pass valve to the "OFF" position. No
water will flow through the house.To restart the water, set the by–pass valve
to the "SERVICE" position.You may put the softener into by–pass at any
time, if necessary, by putting the by–pass valve into the "BY–PASS" posi-
tion.You will still get water throughout the house; however, all of the water
will be untreated.To return the softener to service, set the by–pass valve to
the "SERVICE" position.
NOTE: By–pass styles vary, and yours may not be as described. Contact your
Kinetico dealer for further assistance.
fig. 10
Turn handle and align arrow
with appropriate setting.
Service
By-pass
closed
Inlet
open
Kinetico By-pass Valve
Outlet Inlet
open closed
To close
turn
clockwise
By-pass
By-pass
open
Outlet
closed
To open
turn
anti-clockwise
Off
By-pass
closed
Inlet Outlet
closed closed
3-valve By-pass
13