babymoov A014407 Instrucciones De Uso página 15

H12 & H13 & H14. Zoom
Zoom 10 x function by clicking on + or - on the screen.
H15 & H16. Video Off Timeout
Screen stand-by (from 5 s to 180 s).
Please note: this mode is not available when the VOX function is activated.
H17 & H18. Touch Panel Calibration
To calibrate your touch screen, touch the centre of the cross exactly at the point where it appears on the screen in
all 4 positions, otherwise the tests will continue.
H19 & H20. Language
Available in 5 languages.
H21 & H22. Motion Detection
Programming the detection of movement.
- Activating the motion detection function: ON
- Motion detector sensitivity settings:
- Activates a default video recording
ATTENTION: A MICRO SD CARD IS REQUIRED!
- Alarm activation: ON
ON
H23 & H24. USB Output
2 possibilities:
- : charging the receiver battery.
- : data transfer of pictures/videos to computer (cable not included).
ATTENTION: A MICRO SD CARD IS REQUIRED!
H25 & H26. Micro SD Card Update
Updating the micro SD card.
H27 & H28. Reset To Factory Default
Resetting the settings.
H29 & H30. About & Version
1
H31. : video camera parameters
Unconnected video cameras are grey.
H32 & H33. Temperature/Alarm
- Select °C ou °F F C .
- Click on the icon to display arrows up/down. Adjust the desired temperature range. Outside this field an
audible alarm will be activated.
BABY MONITOR TOUCH SCREEN • Instructions for use
MD
/ OFF
ON
MD MD MD
, ,
LO MI HI
. Selection of recording time (5 s to 1 min).
/ OFF . Please note: this alarm can be used without a micro SD card.
OFF
MD
.
OFF
.
15