Precautions; Operation Precautions; Name Of The Parts - Vieta Home VH-TT500SL Manual De Usuario

Precautions

Thank you for purchasing this fine product.
1. Power sources
This product should be operated only from the type
of power source indicated on the marking label. If
you are not sure of the type of power supply to your
home, consult your product dealer or local Power
Company.
2. Do not block the ventilation slots
Do not block the ventilation slots. Do not place
objects on the unit as the heat generated inside
not dissipate. This could cause increased internal
temperature and have an adverse effect on the
performance of its different components. Remember
that an important part of the heat is generated by
using the plate for extended periods of time, with
high levels of output power.
3. Installation precautions
Do not install the unit in any of the following locations
since this may result in a deterioration in performance
or malfunction:
• Locations exposed to direct sunlight or near object
radiating heat such as heating appliances.
• Locations exposed to moisture or humidity.
• Cartridge may pick up slight sound pressure or
vibrations of the speakers coming along the floow
or though the air resulting in feedback or howling
sound. Find a location which is very stable and
vibration free.
• The legs have functions for adjusting the height
of the unit itself. Adjust the legs to stabilize the main
body horizontally.
3. The model may not be able to perform at its best in
an extremely cold envirnment. The optimum ambient
o o
temperature range is 0 C and 35 C.
14

Operation Precautions

1. Always clean the stylus both before and after
playing a record with a soft brush, and try to make it
a rule to clean the record with a soft brush and try to
make it a rule to clean the records with a good quality
cleaner.
2. Be careful not to make the turntable vibrate while a
record is playing, since this can result in damage to
the stylus and record.
3. When clanging over the headshell, clamp the
tonearm to the arm rest so that the tonearm shaft is
not strained in any way.
4. Place only one record at a time on the platter. If
two or more records are sacked on the platter, the
stylus will not make proper contact with the grooves,
and this will impair the quality of reproduction.
5. Volatile materials should not be used, such as :
alcohol, thinner, benzone etc. They may remove the
painter or damage the lustre, please avoid.
Turn-table

Name of the Parts

1. 45-rpm Adaptor
2. Slip Mat
3. Center Spindle
4. Strobe Dots
5. Power Switch / Strobe
6. Start/Stop Button
7. Taget Light
8. Headshell
9. Speed Select Buttons
10. Pitch Control Slider (+/– 10%)
11. Tonearm
12. Cueing Lever
13. Arm Rest
14. Anti-skate Knob
15. Stylus-Pressure Ring
16. Counterweight
17. Position for Preparing Cartridge
18. Hinge for Dust Cover
15
ENGLISH