Using The Saw; Important Warnings - Berkel BS+2400 F Manual De Uso

B - Blade mobile guard in the work area (pusher) "3" (Fig. 5.2.1)
Check that the pusher "3", which prevents operator contact with the blade, is fitted,
in perfect condition and correctly positioned.
5.3 Starting the saw (Fig. 5.3.1)
Move the machine power supply differential switch from
position "0" to position "I". The illuminated indicator "2",
indicating that the machine is powered, must be illumi-
nated. Press the start push-button "1", thus activating
rotation of the blade.
5.4 Stopping the saw (Fig. 5.3.1)
To stop quickly, for example in emergencies, press the
emergency stop button "1".
The illuminated indicator "2" remains on and indicates that the electrical panel is
still powered. Set the differential switch fitted upstream to "0", thus disconnecting
the machine.
Note: Whenever a work shift is finished and the machine is left to rest, the differen-
tial switch must be set to "0".

6 Using the saw

6.1 Important warnings

ATTENTION!
Only authorized personnel may use the machine. Before beginning work, the op-
erator must ensure that all the guards are in place and that the safety devices are
fitted and in efficient working order. If not, switch the machine off and contact the
head of maintenance. Perform several empty cutting operations with the assis-
tance of specialist personnel in order to acquire the sensitivity necessary for work-
ing in complete safety.
6.2 Preliminary settings (Fig. 6.2.1)
The portioning device "1" must be regulated
according to the size of the piece to be cut.
-
To regulated the portioning device "1" loosen the
knob "2" and set the portioning device to the
distance
required
Tighten the knob "2".
from the cutting width.
1
22
Fig.5.3.1
1
2
3
2
Fig. 6.2.1