Tips And Tricks; Available Accessories; Repairs; Environmental Protection - Metabo KGS301 Manual De Instrucciones

10. Tips and Tricks

•
Use roller supports on both sides of
the saw when cutting long stock.
•
When cutting a warped or twisted
board, place it with the outside of
the curve against the fence.
•
To simplify repetitive cut-off work
use a stock stop (optional acces-
sory).
•
Keep surfaces of rotating table and
saw base clean – in particular,
remove resin residue with a suitable
cleaning and maintenance spray
(optional accessory).

11. Available Accessories

For special tasks the following accesso-
ries are available at your specialized
dealer – see back cover for illustrations:
A
Dust Collection Attachment
(standard delivery for KGS 331)
helps to protect your health and
keeps the shop clean.
B
Work Clamp
required for accurate cuts as well
as for cutting round stock and non-
ferrous metals.
C
Table Extension, left
required for cutting long stock;
extents up to 3000 mm;
folds up for convenient storage.
D
Table Extension, right
required for cutting long stock;
length 1660 mm;
folds up for convenient storage.
E
Workstand
Provides for a secure machine
stand and optimal working height;
ideal in mobile use, folds up for sav-
ing space.
F
Stock Stop
required for repetitive cut-off work.
G
Mini-Laser for dimensioning
shows line of cut in actual position
on the workpiece.
H
Suction Adapter
to connect a shop vacuum to the
dust collection attachment.
I
Table Extension left and right
ideal for mobile use if long stock is
cut frequently.

12. Repairs

A Danger!
Repairs to power tools must be
carried out by qualified electricians
only!
Power tools in need of repairs can be
sent to the service centre in your coun-
try. See in the spare parts list for the
address.
Please attach a description of the fault to
the power tool.

13. Environmental Protection

The saw's packaging can be 100 %
recycled.
Worn out power tools and accessories
contain considerable amounts of valua-
ble raw and plastic materials, which can
be recycled.
These instructions are printed on chlo-
rine-free bleached paper.
ENGLISH

14. Trouble Shooting

A Danger!
Prior to any servicing:
1. Switch Off.
2. Unplug.
3. Wait for saw blade to come to
standstill.
Check to see that all safety devices
are operational after each fault ser-
vice.
Motor does not run
No mains voltage
− check cables, plug, outlet and mains
fuse.
Loss of cutting performance
Saw blade blunt (possibly tempering
marks on blade body)
Saw blade unsuitable for the material;
Saw blade warped
− replace saw blade (see section
"Maintenance").
Saw vibrates heavily
Saw blade warped
− replace saw blade (see section
"Maintenance").
Saw blade not properly installed
− mount saw blade properly (see sec-
tion "Care and Maintenance").
Saw rocks
Fastening screws loose
− retighten fastening screws.
Rotating table does not turn smoothly
Chips under rotating table
− remove chips.
Fence bent
− install a straight fence.
19