Connecting Insufflation Tube Set - Stryker PNEUMO SURE Instrucciones De Uso

5.5

Connecting Insufflation Tube Set

Three different insufflation tube set types can be connected to the insufflation
tube connection at the front of the device (see Fig. 5-1 Device Front, page 16,
(3)).
Heated tube set with Disposable (single use) insufflation tube set with:
Real-Time Pressure
• Filter
Sensing (RTP)
• Gas heating
• Measuring tube for direct pressure measurement
(RTP)
High Flow tube set Disposable (single use) insufflation tube set with:
with Real-Time Pres-
• Filter
sure Sensing (RTP)
• Measuring tube for direct pressure measurement
(RTP)
High Flow II tube set Disposable (single use) insufflation tube set with:
• Filter
Insert the plug of the insufflation tube set correctly into the insufflation tube set
connection at the front of the device until it snaps firmly into place.
• A short acoustic warning signal is emitted,
• the message Tube set connected is displayed,
• a check mark is displayed.
If the tube is accidentally unlatched by pressing twice or if the tube is removed
during insufflation:
• 2 long acoustic warning signal are emitted,
• the message Tube set not connected is displayed,
Operating the Device - General
Connecting the tube set
Set Pressure Actual Pressure
mm Hg mm Hg
ü
15
0.0
Liter
Tube set connected
Change Actual
START
START
Mode
EN
Set Flow
l/min
3
0
l/min
19