Checking For Wear And Damage; Checking Spoke Tension - SHERCO SE 250i Manual De Propietario

CHeCKing FOr Wear and daMage

CHeCKing sPOKe TensiOn

- Regularly check the depth of the tread.
Tread depth
If the depth is less than the value shown :
- Change the tire
Check for cuts, cracks, nails, sharp objects and
bulges on the tire.
If the tire is damaged :
- Change the tire
- Changer le pneumatique
Do not neglect the tension of the spokes.
aTTenTiOn
Proper tension ensures stability and secure riding.
- Check the spoke tension before and after each
use of the bike, especially if the spokes are new
or have been recently adjusted.
- Use a screwdriver to tap on each spoke.
The sound must be sharp.
- If it is dull, take the bike to a SHERCO dealer to
get the spokes properly adjusted.
≥3mm
109