Juniper Archer FIELD PC Manual Del Usuario página 10

Step 2: Charge the battery
pack
1. Mount the plug onto the wall charger (if it is not
already assembled).
2. Plug the wall charger into an outlet.
3. Plug the other end of the wall
charger into the DC jack on the Field
PC. The device turns on after a few
seconds, and a fl ashing red light
signals the device is charging.
4. Charging the Field PC for 4.5 hours
charges it up to 95%. Let the device charge for
6 hours to get a full charge. Note: If the Field PC
suspends and the fl ashing red LED turns off, the
device keeps charging.
Charging temperatures
Only charge your battery pack in temperatures between
32°F and 104°F (0°C and 40°C). For best results, charge
the battery pack at room temperature (68°F or 20°C).
Step 3: Establish basic
settings on the device
Using the stylus, follow the instructions on the screen to
calibrate the device and establish basic settings.
We recommend creating a name for the Field PC so
external devices like desktop computers or devices that
use Bluetooth
from other devices more easily.
10
® technology can differentiate the Field PC