Maintenance/Repair - RugGear RG910 Guia De Inicio Rapido

• Do not use any chemical cleaning agents to clean the device or the charger. Use a damp and anti-static
soft cloth for cleaning.
• The adapter be installed near the equipment and be easily accessible.
• The product must only be connected to USB interface version USB2.0.
• Use Use carefully with earphones as excessive sound pressure from phones and
headphones can cause hearing loss.
• Do not discard old and abandoned lithium batteries in the trash; send them to
designated waste disposal locations.
• The user is solely responsible for any and all damages and liabilities caused by
malware downloaded when using the network or other data-exchange functions
of the device. RugGear Ltd. cannot be held responsible for any of those claims.
Warning
RugGear Ltd. will not assume any liability for damages caused by disregarding any of these instructions or
by any inappropriate use of the device.

6. MAINTENANCE/REPAIR

Please note any legal requirements for periodic inspection. The device itself has no user-serviceable parts.
It is recommended to perform inspections according to the safety regulations and instructions. If there
is a problem with the device, please contact your vendor or consult the service center. If your device is in
need of repair, you can either contact the service center or your vendor.
7. BATTERY
The device must only be charged at ambient temperatures in a range from 0°C - 45°C. The phone's normal
operating temperature is -10 °C - 50 °C. In order to ensure the normal phone functions, do not use this
phone outside the temperature range.
Caution:
Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the
instructions.
8. INSTALLATION OF THE MICRO SIM CARD
The device features one slot for a micro SIM card. The slot for the micro SIM card is on the top of the device
(see page 3).
Warning
Do only change the SIM card when the device is switched off. Do not try to insert or remove the SIM cards
when any external power supply is connected.
9. INSTALLATION OF THE microSD CARD
The device features a microSD card slot (up to 128GB). The slot for the microSD card is on the top of the
device (see page 3).
To remove the microSD card, please make sure that the card is not in use by the device.
To remove the microSD card follow the instructions in<Settings> →<Storage>.
Warning
Only change the microSD card when the device is switched off. Do not try to insert or remove the microSD
card when any external power supply is connected, otherwise the microSD card may be damaged.
10. KEYS AND SPECIAL FEATURES
(see illustration on page 3)
1_SOS KEY: Long press automatically selects an emergency number stored by you. This function can only
be used in conjunction with an optionally available LWP app.
2_SD CARD SLOT: Use for microSD card.
3_SIM CARD SLOT: Use for SIM card.
4_CAMERA: Front camera.
5_VOLUME CONTROL: Volume up.
6_VOLUME CONTROL: Volume down.
7_CONTROL LED: Control LEDs for power on, loading and flash.
8_POWER KEY: Long press to power ON/OFF the device. Short press to power ON/OFF the standby mode.
9_FUNCTION KEY M1: Optional key used by different apps.
10_FUNCTION KEY M2: Optional key used by different apps.
11_BACK KEY: Return to previous screen mask.
12_HOME KEY: Return to the homescreen.
EN
5