Audio Adjustments - Pioneer DEH-9350SD Manual De Instrucciones

Section
Operating this unit
02
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Play mode (repeat play)
1 Press M.C. to select a repeat play range.
For details about the settings, refer to Selecting
a repeat play range on the previous page.
Shuffle mode (shuffle)
1 Press M.C. to select your favorite setting.
! Shuffle Songs – Play back songs in the se-
lected list in random order.
! Shuffle Albums – Play back songs from a
randomly selected album in order.
! Shuffle OFF – Cancel random play.
Shuffle all (shuffle all)
1 Press M.C. to turn shuffle all on.
To turn off, set Shuffle mode in the FUNC-
TION menu to off.
Link play (link play)
1 Push M.C. left or right to change the mode;
press to select.
For details about the settings, refer to Playing
songs related to the currently playing song on
the previous page.
Control mode (control mode)
1 Press M.C. to select your favorite setting.
For details about the settings, refer to Operat-
ing this unit's iPod function from your iPod on
the previous page.
8
En
PAUSE (pause)
1 Press M.C. to pause or resume.
Audiobooks (audiobook speed)
1 Press M.C. to select your favorite setting.
! Faster – Playback at a speed faster than
normal
! Normal – Playback at normal speed
! Slower – Playback at a speed slower than
normal
Sound Retriever (sound retriever)
1 Press M.C. to select the desired setting.
For details, refer to Enhancing compressed
audio and restoring rich sound (sound retriever)
on the previous page.
Notes
! Switching the control mode to iPod pauses
song playback. Operate the iPod to resume
playback.
! The following functions are still accessible
from the unit even if the control mode is set
to iPod.
— Volume
— Fast forward/reverse
— Track up/down
— Pausing
— Switching the text information
! When the control mode is set to iPod, opera-
tions are limited as follows:
— Only Control mode (control mode), PAUSE
(pause) and Sound Retriever (sound re-
triever) functions are available.
— The browse function cannot be operated from
this unit.
Operating this unit

Audio Adjustments

1
1 Audio display
Shows the audio adjustment status.
Advanced operations using
special buttons
Subwoofer on/off setting
1 Press
/BASS to select the subwoofer on/off
setting menu.
2 Press M.C. to turn subwoofer output on or off.
3 Push M.C. left or right to select the phase of
subwoofer output.
Subwoofer adjustment
1 Press
/BASS to select the subwoofer adjust-
ment menu.
2 Push M.C. left or right to select the cut-off fre-
quency.
50Hz—63Hz—80Hz—100Hz—125Hz
3 Push M.C. up or down to adjust the output
level of the subwoofer.
Each time M.C. is pushed up or down, sub-
woofer level increases or decreases. +6 to -24
is displayed as the level is increased or de-
creased.
Bass boost
1 Press and hold
/BASS to select the bass
boost setting menu.
2 Push M.C. up or down to select a desired level.
Audio function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select AUDIO.
3 Turn M.C. to select the audio function.
After selecting, perform the following proce-
dures to set the audio function.
Fader/Balance (fader/balance adjustment)
1 Push M.C. up or down to adjust the front/rear
speaker balance.
! The front/rear speaker balance cannot be
adjusted when the rear output setting is
Rear SP :S/W. Refer to S/W control (rear
output and subwoofer setting) on page 10.
2 Push M.C. left or right to adjust the left/right
speaker balance.
Powerful (equalizer recall)
1 Push M.C. left or right to select an equalizer
curve.
Powerful—Natural—Vocal—Custom1—Cus-
tom2—Flat—Super bass
100 Hz (equalizer adjustment)