Switching The Handset On/Off; Enabling/Disabling The Keypad Lock; Dialled Calls - Auerswald COMfortel M-530 Manual De Instrucciones

13 Keypad (here: Key 1)
Use this to call up the voicemail function on the PBX (if configured: press for a long
time)
14 R key
- query call (flash)
- insert a dialling pause (press for a long time)
15 Accept key/Hands-free key
Function varies depending on situation: dial displayed number, accept call, switch
between receiver operation and hands-free operation, open the Redial List (press for a
short time), start dialling (press for a long time)
16 Control key/Menu key
Function varies depending on situation: Use this to navigate in menus and input fields

Switching the Handset On/Off

Switching on:
Switching off:
p

Enabling/disabling the Keypad Lock

The keypad lock prevents the telephone from operating unintentionally. If the
handset is secured with a PIN, you need that PIN to unlock it. When delivered,
the PIN is set to "0000".
Switching on:
Switching off:
Note: If a call is signalled on the handset, the keypad lock is automatically
disabled. You can accept the call.
Caution: When the keypad lock is enabled, you cannot call emergency
phone numbers either.

Dialled Calls

Dialling the Phone Number
1. Use the to enter the number.
2. Press for a short time.
COMfortel M-530 - Instructions V03 02/2020
On the switched-off handset, press
When the switched-off handset is in an idle state, press
for a long time.
Press for a long time.
Press for a long time. Use the
PIN (if it is not 0000).
Using the Telephone
for a long time.
to enter the handset
31