BOJ TB-1700 Manual De Uso página 3

Notice: there is a protection system, please rotate the switch to off before using or else the
buttons and knob switch can be used, please rotate the switch to on then 3 buttons (pulse
smoothie and ice crush) can work, do not work over 2 minutes when the knob switch is placed
during the "min" to "max" area.
1
Blender jar disassembly and blade installation
1. Place the blender cup with mouth facing down on a flat table and turn clockwise to remove the
blade holder as shown in picture 5.
2. The blade seal ring could be removed from the blade holder, as shown in picture 5.
For installation, please put the seal ring into the blade holder, and then rotate the holder counter
clockwise into the blender cup.
Caution: Beware the blade is sharp. Do not miss the seat ring during the assembling, and fasten
the blade holder counter clockwise.
Number Name
1 Blade holder
2 Blender cup
3 Seal ring
Troubleshooting
Problem
Machine does not work
Machine stops running suddenly
No reaction after knob / button operation
Cannot open the blender lid
2 3
Fig. 5
Ensure correct assembly and glass jar is fully
covered.
Make sure power plug is plugged in properly.
Processing bowl may loosen during vigorous
processing. Please re-install the bowl cover.
Reset to Off position and then turn to be On
position; Stop current working program.
It is a normal condition, the machine is
equipped with a protective structure, please
remove the jar from the machine before
opening the lid.
- 3 -
4
1
2
3
Fig. 6
Solution
English