Toyotomi ETK-S50 Instrucciones De Uso página 4

MANUAL
A
INSTALLING THE AIR PURIFIER
1 Remove the front panel  by pressing the push tabs  on both sides of the
device.
2 Remove the screen filter  from the device and then remove the Semi HEPA-/
Enzyme-filter  and the active carbon filter  Remove the packaging from
both filters.
3 First put the active carbon filter back into the device, followed by the Semi
HEPA-/Enzyme- filter (green side facing the front) and the screen filter.
4 Fasten the front panel by inserting the two hooks at the top into the recesses
in the device. Now click the bottom left and right of the front panel into
position.
5 The device is now ready for uwse.
!
attention!
The Semi HEPA-/Enzyme-filter and activated carbon filter must be placed correctly
in order to guarantee correct operation.
B
REMOTE CONTROL
1 Open the cover on the back of the remote control.
2 Insert the batteries, ensuring that the + and – poles are positioned correctly.
3 Close the cover.
attention!
• Handle the remote control with care. It may stop working if it becomes wet or is
!
dropped or damaged in some other way.
• The maximum range is 7 metres.
• Incorrectly placed batteries may cause damage.
4
4