Power Off - ECOVACS ROBOTICS DEEBOT MINI DK560 Manual De Instrucciones

3. Operating and Programming
Start
6
Press the AUTO Mode Button on DEEBOT
or on the Remote Control. DEEBOT starts to
work immediately in AUTO Cleaning Mode.
To choose another Cleaning Mode, please
*
refer to section 3.3 Cleaning Mode Selection
for details.
Pause
7
Pause DEEBOT by pressing the AUTO Mode
Button on DEEBOT or the START/PAUSE
Button on the Remote Control.
DEEBOT can be directed to move forward,
*
backward, left and right using the Direction
Control Buttons on the Remote Control
when it is Paused. DEEBOT does not
clean when Paused.
To save power, the AUTO Mode Button on the robot's Control Panel stops glowing after
*
the robot is paused for more than 10 minutes. Press the AUTO Mode Button on the robot to
wake up the robot, or press any button on the Remote Control to start the robot immediately.

Power OFF

8
Pause DEEBOT. Move the Bottom Power
Switch to the OFF position.
When DEEBOT is not cleaning, it is suggested
*
to keep it powered ON and charging.
11
EN