Mounting Guidelines - dirna Bergstrom bycool MOCHILA Instrucciones De Montaje

ES EN
MOCHILA
Mounting
Guidelines
• Prior to assembly, read the instructions and follow these
throughout the mounting operations.
• Use the appropiate tools for each operation.
Electricity
• Switch the connector off.
• Disconnect the battery before starting mounting
operations.
• Verify that the electrical components have been
connected correctly.
References to position:
RIGHT: Driver's right hand
LEFT: Driver's left hand
Driving torques (N.m)
Steel Quality
Fillet
8.8
M4/60 2.9
M5/80 5.5
M6/100 10
! Important
Evaporative air conditioner works by taking air from
outside and introducing it in cabin. It is essential
that air does not stagnate inside, which would
produce an excess of humidity. All modern cabins
of vehicles are equipped with air inlets, through
which required air comes out as, for instance, in the
case of heating.
Assembler will have to check that these air inlets do
exist and, in case they do not, he will have to mount
them.
As for the user, he will have to periodically make
sure that these air inlets are not blocked by dirt.
Wrench
opening
10.9
4.2 7
7.5 8
13 10
14
Ratchet with 10mm shut-off valve
TOP 10 star screw-driver
10 mm spanner
6 mm allen wrench
Documentation included
Mounting instructions
User's guide
Troubleshooting
Included parts
Warranty
! Important
The following parts will have to be delivered to user:
Winter cover and user's handbook.
The assembler is recommended to read the above
mentioned handbook, before giving it to user, in
order to inform himself of the maintenance and
recommendations on the evaporative equipment
being assembled.
! Warnings
!
Dirna Bergstrom, s.l. will not be held responsible
for any faults arising from inappropriate handling
or installation of the equipment, or due to
modifications or replacements carried out
without our written authorisation.
Tools
220AA50006
220AA2E004
220AA50008
220RE00099
220AA10017
®