Work Safety - CMT ORANGE TOOLS CMT3000 Manual De Instrucciones

WORK SAFETY

1 - Respect all work safety norms indicated by the manufacturer of the machine tool and other
tools being used.
2 - The ellipse and circle cutting jig is safe if used in accordance with all the work safety principles
indicated above.
3 - Always unplug the machine tool when not in use and above all when preparing the ellipse and
circle cutting jig for use.
4 - Read the operating instructions carefully before using the jig.
CMT3000 Spare parts list
Pos. # Description
1 Cross frame in special Derlin®
2 Slider pin with 16mm hole
3 Connector plate
4 Threaded extension rod L=400mm
5 Threaded exten. rod L=400mm with screw/pin
6 Guide rod for router base Ø10x400mm
Guide rod for router base Ø8x400mm*
7 M8 control bolt for slider pin
8 M8x20 inbus screw
9 Split washer 8.4x16x1.6mm for M8 screw
10 Split washer for M8 screw
11 Screw washer for M5 screw
12 Inbus screw M5x16 UNI-5931
13 Self-tapping countersink flat head
wood screw 4x35
14 Countersink flat head wood screw M4x25
*not included in the package
www.cmtorangetools.com
SAFETY AND SPARE PARTS LIST
Quantity
1
2
1
1
2
2
2
2
1
1
1
2
2
4
2
v.2
Code
CMT3000-01
CMT3000-02
CMT3000-03
CMT3000-04
CMT3000-05
CMT3000-06
CMT3000-8
CMT3000-07
CMT3000-08
CMT3000-09
CMT3000-10
CMT3000-11
CMT3000-12
CMT3000-13
CMT3000-14
7