dirna Bergstrom bycool COMPACT 1.4 Instrucciones De Montaje página 23

COMPACT 1.4
Place console and centre equipment in the
14
most convenient place of cabin roof. Once
centred, remove console for later installation.
IVECO Stralis since 2008: Make cuts in
14a
the console at the indicated measurements,
and align the unit by fitting the console in the
original upholstery frame.
120 130
Fasten supports tightening nuts until outside
15
EPDM joint of equipment is compressed,
between 3 and 6 mm.
Important: To avoid water from filtering
inside cabin,
tightening with unit base, as indicated
on diagram.
3-6mm.
Cabin roof
Fasten selflocked nut until
15 EPDM gasket is compressed
between 3 and 6 mm.
130 120
check EPDM joint
EPDM gasket
10 mm*
(*) (approx. after tightening)
14
130
120
Base
Bracket
23
130
Check compression
thickness using a
tape measure in the
four corners.
EPDM gasket
EN
®
10
15