dirna Bergstrom bycool COMPACT 1.4 Instrucciones De Montaje página 24

COMPACT 1.4
EN
Tighten (4) M8 nuts to support and (4) to Unit
16
base.
Position nut M6 (A) after the fastening nut
17
of the interior air distribution panel on each
stud. Position M6 hexagons, screwing on up
to 1 mm above the upholstery. Unscrew the
M6 nuts (A) of this point until they come into
contact with the hexagons, and tighten against
them.
IVECO Stralis since 2008: Adjust the spacer
until the console fits perfectly in the original
housing. (*) this model does not have these
nuts and washers.
17
EPDM
Gasket
Cabin roof
Upholstey
Unit base
M6 Nut (10)
D
(A)
*
M6 Nut
M6 stud
17
1 mm
Approx.
Internal air distribution panel
24
Base Compact
M6 Hexagons
(A)
Upholstery
Foam Gasket
®
16