dirna Bergstrom bycool COMPACT 1.4 Instrucciones De Montaje página 13

COMPACT 1.4
Mount the front air input grille before starting
!
assembly.
Dismantle sun hatch, fastening elements and
1
hand over to client.
1
OUTSIDE CABIN:
2
Position the Compact in the hatch gap on the
original edgeband.
Caution! When positioning the unit above
the hatch gap, check that the wastewater
run-offs are not blocked.
Position the foam rubber, ensuring the softest
3
part is placed on the base of the unit.
Caution: Depending on the cabin, it may be
necessary to use the (2) supplied ducts in
order for the distribution panel to be completely
adjusted.
1
3
13
EN
®
2
Sun hatch