Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
MAIN FUNCTIONS:
It works only with electrical impulse at 12V for 0.5 second provided by a NO (Normal open) circuit or by manual
operation.
It is compatible with intercom systems or control access systems. Can be installed in residential buildings,
commercial spaces, hotels, schools, warehouses, institutions, etc.
INSTALLATION INSTRUCTIONS:
•
Use the screws included in the package to install the lock body, the cylinder and the bolt on the edge of
the door or the doorframe. It is recommended to leave 5 mm gap between the lock body and the bolt.
•
For mounting, you have to loosen the lock body from the 2 screws placed on the side with the bolt. Once
you have set the lock's position, you can complete the mounting by fixening the 4 screws as described
below.
•
The spring is adjustable according to the weight of the door. Adjust the hexagon nut with a set of 12 keys
or a pliers.
•
The direction of the bolt installation can be changed depending on the type of door opening.
•
Use a command of 9-12 V cc. and power bigger than 12W. Press or turn the button, the lock can be
unlocked automatically after a second.
PRECAUTIONS:
The unlock time as long as the lock is electrified can not be longer than 3 seconds.
For safety reasons, you need to use drum powder lubricants for the cylinder.
CHARACTERISTICS:
•
Lock type: rim lock
•
Inner opening mode: mechanical
•
Voltage (impulse): 0,5 - 3s at 7 - 12 V d.c. / 2 - 3.5A
•
Operation mode: Fail Secure (NO)
•
Dimensions: 129 x 105 x 39 mm
•
Weight: 1117g
4
Publicidad
Tabla de contenido
