Plasticizer Warning; Electric Power; Getting To Know Your 10 Speed Blender; Before Using For The First Time - Bella BASICS Manual De Instrucciones

Plasticizer Warning

CAUTION: To prevent plasticizers from migrating to the finish of the countertop
or tabletop or other furniture, place NON-PLASTIC coasters or place mats between
the appliance and the finish of the countertop or tabletop. Failure to do so may
cause the finish to darken; permanent blemishes may occur or stains can appear.

Electric Power

If the electrical circuit is overloaded with other appliances, your appliance may
not operate properly. It should be operated on a separate electrical circuit from
other appliances.

Getting to know your 10 speed blender

Product may vary slightly from illustration
Lid with 2 oz.
measuring cap
Plastic jar
Gasket
Blade
attachment
Blade base

Before using for the first time

1. Carefully unpack the 10 speed blender and remove all packaging materials. Check the contents to
ensure that all parts are present, and have been received in good condition.
2. Only handle blending blade by its collar.
WARNING: Do not touch blades. Blade attachments are very sharp. Use extreme care when
handling. Failure to do so can result in personal injury.
3. Wash all lids in warm, soapy water. Rinse and dry thoroughly.
4. Clean each cup before first use. Fill cup one-quarter full with clean, warm water. Following the steps
outlined in the operating instructions, pulse several times using the blending blade.
Rinse thoroughly.
5. The motor base may be wiped with a damp cloth.
WARNING: DO NOT IMMERSE THE MOTOR BASE IN WATER.
4
Motor
base
Speed
control