Assembly; Rear Wheels; Bumper Bar - BABYTREND TS86 Manual De Instrucciones

ASSEMBLY

REAR WHEELS

2) • Lean the stroller forward to rest on the
front wheels.
• Press the rear wheel posts into the rear
frame hub until it clicks into place (Fig. 2).
NOTE: Pull on the rear wheel to ensure
that it is securely attached to the stroller.
Note: use stroller if wheels do not
NEVER
lock into place. If you need assistance,
please contact our customer service
department at 1-800-328-7363, Monday-
Friday, between 8:00 am and 4:30pm, PST.
MULTI-POSITION HANDLE
3) • To adjust the handle, press the release
buttons to move the handle up or down
to a comfortable position for the user
(Fig. 3).
NOTE: Make sure the handle clicks into
place before using.
5
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.

BUMPER BAR

4) • Attach the bumper bar by lining up
Fig. 2
• To detach bumper bar, press the release
ATTATCHING THE SEAT
Release Button
5) • Make sure the seat fabric is properly
• Attach the seat by lining up the seat
Fig. 3
WARNING:
Do not use bumper bar to
carry seat with child inside.
The bumper bar is not a
carrying handle.
anchors with the slots on the seat.
Push until it clicks into place (Fig. 4a).
Note: The bumper bar must be securely
attached before using this product.
button on the bottom of the bar and pull
bar out of the anchor. Swing the bar
upwards to access the seat (Fig. 4b).
attached to the seat support bar. If the
seat fabric is unzipped, wrap the seat
fabric around the seat support bar (Fig.
5a) and zip the fabric closed.
anchors on the side of the seat with the
anchors on the stroller frame and push
them together until they click securely
(Fig. 5b). The seat can face in either
direction, front or backwards.
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
Fig. 4a
Fig. 4b
Fig. 5a
Fig. 5b
6