Ideally, the speakers should be placed upright,
•
with the tweeter above the woofer. If they
must be mounted on their sides, orient them
so that the tweeters are on the inside to
improve imaging.
For best results, use balanced XLR or TRS
•
cables for the signal input. Unbalanced cables
can introduce unwanted noise.
SPECIFICATIONS
Model
Woofer Drivers
Tweeter Driver
Frequency Response
Maximum Sound Pressure Level
Amplifier Class
Low Frequency Amplifier Power
High Frequency Amplifier Power
Input Connections
Input Impedance
Cabinet Material
Cabinet Finish
Ported?
Dimensions
Weight
625880
5" glass composite cone
1" silk dome
35Hz ~ 20kHz
86dB
AB
30 watts
30 watts
1x XLR, 1x TRS, 1x RCA
10kΩ (balanced)
Medium Density Fiberboard (MDF)
Black polyethylene
Yes, rear port
7.2" x 7.1" x 10.0" (184 x 181 x 253 mm)
23.1 lbs. (10.5 kg)
9