MAKING BREWED COFFEE
Use the illy capsules shown in the figure.
Move the cup support grid to the vertical
position. Fill the tank with fresh drinking water.
SUGGESTIONS
To enjoy a high quality espresso remember to:
• Use the capsule for espresso with the
• Change the water in the tank every day.
• use water with a total hardness of less than 12 French degrees to reduce scaling in the machine;
• Use thick and preheated cups to prevent the coffee from cooling down too fast. The cups can be heated by rinsing them with hot water.
1
Slowly lift (to the stop) the lever that opens/
closes the capsule compartment.
5
Place a large cup or mug below the dispenser.
button. If the incorrect capsule/button combination is used, repeat the operation correctly.
2
Insert the capsule as shown in the figure.
6
Press and release the
button. The machine
will stop dispensing automatically.
3
Close the lever completely.
7
To eject the used capsule, slowly lift the lever
and the capsule will be automatically collected
in the specific container. If the capsule is not
ejected, repeat the operation.
EN
4
8
29