Treble Control - Rampage ACD-16 Manual Del Usuario

Bass mode by pressing the Select button
3
so the BAS indication appears on the
display panel. Within 5 seconds of choosing
the Bass mode, press the down side of the
2
Level control to decrease the bass
response or press the up side to increase
it as desired. The level will be shown on the
display panel from a minimum BAS -7 to a
maximum of BAS 7 (BAS 0 indicates flat
response). The display will automatically
return to the normal indication 5 seconds
after the last adjustment or when another
function is activated.
5 5 5 5 5

TREBLE CONTROL

To adjust the treble level, first select the
Treble mode by pressing the Select button
3
so the TRE indication appears on the
display panel. Within 5 seconds of choosing
the Treble mode, press the down side of
2
the Level control to decrease the treble
response or press the up side to increase
it as desired. The level will be shown on the
display panel from a minimum TRE -7 to a
maximum of TRE 7 (TRE 0 indicates flat
response). The display will automatically
return to the normal indication 5 seconds
after the last adjustment or when another
function is activated.
6 6 6 6 6
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance,
first select the Balance mode by pressing
3
the Select button so the BAL indication
appears on the display panel. Within 5
seconds of choosing the Balance mode,
press the down side of the Level control
to adjust the stereo balance to the left
channel speakers or press the up side to
adjust it to the right channel speakers. The
balance position will be shown on the display
panel from BAL 10 (full left) to BAr 10 (full
right). When the volume level between the
left and right speakers is equal, BAL 0 will
be shown on the display panel. The display
will automatically return to the normal
indication 5 seconds after the last
adjustment or when another function is
activated.
7 7 7 7 7
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance,
first select the Fader mode by pressing the
3
Select button
appears on the display panel. Within 5
seconds of choosing the Fader mode, press
the down side of the Level control
adjust the front-rear speaker balance to the
rear speakers or press the up side to adjust
it to the front speakers. The fader position
will be shown on the display panel from FAr
10 (full rear) to FAF10 (full front). When the
level between the front and rear speakers
is equal, FAd 0 will be shown on the display
panel. The display will automatically return
to the normal indication 5 seconds after the
last adjustment or when another function is
activated.
8 8 8 8 8
TRACK SELECT (TRACK
TRACK )
The Track Select functions are used to
quickly access the beginning of a particular
track during CD player and CD changer
operation. Each time the Forward Track
Select (TRACK
2
pressed, the next higher track number will
be selected as shown on the display panel.
Similarly, each time the Backward Track
Select (TRACK
so the FAd indication
2
to
/
) side of the button is
) side of the button is
128-5807C
7 of 44
6 6 6 6 6