Nussbaum POWER LIFT HDL 6500 SST DG Instrucciones De Servicio página 118

8.3.4 Hilti injection anchor (2.65 HDL SST, 2.70 HDL SST, 2.80 HDL SST)
Quality of concrete Normal armouring
subject to alterations!
Adhesive and anchor rod:
Art. Hilti:
Seismic / filling set or suitable filling method
Effective anchoring depth:
Material:
Registration number:
Issued / valid:
Anchor plate:
Ground:
Installation:
Reinforcement:
Observe necessarily the installation description of the dowel manufacturer. Use longer dowels with ver-
sion with floor pavement and tiles.
It is possible to use equivalent injections dowels (with license) of other manufacturer but observe their
regulations.
OPI-POWER LIFT HDL 6500 SST DG-7000 SST DG-8000 SST DG - HYMAX H 6500 DG-H 7000-V1.0-DE-EN-FR-ES-IT
118
HIT-HY 200-A + HIT-V (5.8) M16
387066 HIT-V-5.8 M16x300 / 2022696
h = 190.0 mm
ef
5.8
ETA 11/0493
2/3/2017 | -
l x x ly x t = 850.0 mm x 525.0 mm x 30.0 mm
C racked concrete, C20/25, fc,cube = 25,00 N/mm2; h = 226,0 mm,
Temp.: 24 °C (max. 40 °C)
Drilled hole: hammer-drilled, dry
N o reinforcement or rod spacing ≥ 150 mm (each diameter) or ≥ 100
mm (diameter ≤ 10mm)
No edge length reinforcement
Reinforcement is provided to prevent cracks according to EOTA TR
029, 5.2.2.6.