Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Automatic Power-off
If you have not used the meter or rotated the rotary switch for about 15 minutes, the meter
will turn off automatically and go into Sleep mode.
To arouse the meter from Sleep, rotate the rotary switch or press a button.
If you press the "SELECT" button to arouse the meter from Sleep when the rotary switch is
MAINTENANCE
or solvents.
below steps:
1 Turn the meter off, remove all test leads.
2 Shake out any dirt that may be in the terminals.
BATTERY REPLACEMENT
should be replaced immediately.
To replace the batteries, remove the screws on the battery cover and remove the battery
cover, replace the exhausted batteries with new batteries of the same type. Reinstall the
battery cover and the screws.
Warning
Remove the test leads from the meter and remove the jaws from the conductor under
test before opening the case or the battery cover.
ACCESSORIES
Manual: 1 piece
Test Lead: 1 pair
PRESENT
K Type Thermocouple : 1 piece
NOTE
1 This manual is subject to change without notice.
2 Our company will not take the other responsibilities for any loss.
3 The content of this manual can not be used as the reason to use the meter for any special
application.
DISPOSAL OF THIS ARTICLE
article, then please keep in mind that many of its components
consist of valuable materials, which can be recycled.
Please do not discharge it in the garbage bin, but check with
your local council for recycling facilities in your area.
18
18
Publicidad
Tabla de contenido
