Setup
1. Placement
Keep other wireless equipment at least 30cm (1ft) away from your MRx to
avoid interference. Avoid placing inside or near a metal cabinet as this will
reduce Wi-Fi and Bluetooth range.
2. Fit the stand
Fit the stand to your MRx in either portrait or landscape mode, ensuring you
push the stand firmly into the corresponding rubber sockets on the back of
your MRx and place on a stable and level surface.
3. Select stereo mode
Set whether your MRx is in
stereo/mono/left/right mode
using the STEREO MODE
SWITCH on the back panel.
See Stereo mode section for
more details.
EN-6