Connecting A Bluetooth Device - RuarkAudio MRX Guia Del Usuario

Bluetooth
To change to Bluetooth mode, press the CONTROL
KNOB until the blue Bluetooth indicator light illuminates
or use the Ruark Link app to select Bluetooth source.

Connecting a Bluetooth device

When you select Bluetooth mode, your MRx will go into
pairing mode and the Bluetooth indicator light will flash.
Use the Bluetooth setup on your phone, tablet or laptop
to pair and connect it to your MRx. It will appear in the
list of paired devices as Ruark MRx although this will
change if you rename it using the Ruark Link app.
It may take a few seconds for your MRx to appear in the
list on your device, and in some cases you may need to
input "0000" as the pairing password.
Bluetooth volume
If your phone, tablet or laptop allows you to vary the
volume of Bluetooth playback, we recommend you set it
to maximum for optimum playback quality.
Auto connect
When you change to Bluetooth mode, your MRx will
attempt to reconnect to the last connected device. If it
can't connect, it will automatically enter pairing mode.
Pairing additional devices
You can pair up to 5 devices, although you will only be
able to play audio from one device at a time.
For more information visit
www.ruarkaudio.com/support
Your MRx includes aptX coding technology so if your
smart device is also aptX enabled, you will benefit from
CD-quality streaming.
EN
DA
DE
FR
IT
ES
NL
NO
EN-9