PIXO C2+ Manual De Instrucciones página 15

NiMH / NiCd charge function
• Unique snap-in support and contact method for 1-2 NiMH / NiCd 1.2 V AA
Mignon or AAA Micro batteries
• Special microcontroller to control and supervise all charge processes
• Smart deltaV Cold-Charge-Methode and trickle charge
• Charging time from 2-8 hours depending on battery charge status and
capacity
• NiMH / NiCd charge output rating: 2 x 1.4 VDC ~700 mA
Mobile Phone and USB charge function
• The charger comes with a special USB Mobile Phone Charge Cable with
adapters for the most up-to-date mobile phones from Nokia, Sony Ercisson,
Motorola and Samsung.
• All other devices are charged via generic USB cable.
• The charging process is controled by the circuit of the external device and
it is possible to charge different battery technologies. The charging states
are shown on the external device. The charging time depends on the
external device. It is not possible to indicate any charging time for these
external devices.
• USB output rating: 5.3 VDC maximum 500 mA
Generic technical specifications
• LEDs for visual indication of Li-Ion, NiMH or NiCd charge process
• Compact and light base unit with 125 x 65 x 27 mm and 85 grams
• Worldwide home use via the ultra light and compact 100-240 V switch
mode power supply with 12 VDC 1200 mA
• Mobile use via 12V car cigarette lighter plug
Scope of supply (what is in the box)
Base Unit, Power Supply, Car Cigarette Lighter Plug, USB Mobile Phone
Charge Cable with 9 Adapters, Users Manual
Charging process
Please connect the power supply or the car cigarette lighter plug to the
charger. The charger is ready to use when the red Power LED is on. You can
charge 1-2 NiMH / NiCd batteries or one Li-Ion battery pack.
Caution! You can not charge NiMH / NiCd batteries and Li-Ion battery packs
at the same time!