Enter Operator N; Leak Check - MasterCool 69789-220 Instrucciones De Operación

Key in the printing set up the ↓↑ arrows to move within the line. Then press ENTER to confirm
and go to the next lines.
NOTE: The numerical keys include an alphabet similar to that for text messages, for example:
press "2" once to display "A", twice to display "B", three times for "C" and four time for "2".

ENTER OPERATOR N

From the CONFIGURATION MENU:
Select ENTER OPERATOR N and the following screen is displayed:
It is possible to enter an alphanumeric code of 10 symbols to indicate the habilitation nr of the
operator. This number will be indicated in all printouts.

LEAK CHECK

It is possible to edit the intervals between leak checks on the A/C system.
From the CONFIGURATION MENU:
Select LEAK CHECK and the following screen is displayed:
Key in the time before the leak check and then press ENTER to exit.
NOTE: A period of less than 10 minutes cannot be set.
INSTRUCTIONS MANUAL
CONF. PRINT HEAD.
1:
. . . . . . . . . . . . .
LANGUAGE
UNIT OF MEASURE
OPTIONS
SET DATE & TIME
CONF. PRINT HEAD.
ENTER OPERATOR NR.
ENTER OPERATOR N°
........
LANGUAGE
UNIT OF MEASURE
OPTIONS
SET DATE & TIME
CONF. PRINT HEAD.
ENTER OPERATOR NR.
CHECK LEAKS
NITROGEN LEAK THRESHOLD
LEAK CHECK
Time before
Leak check: xx min
-25-