Programming Coffee Preparation & Ambient Lights - Quality Espresso FUTURMAT SENSIUS Manual De Instrucciones

5.2 Programming coffee preparation & ambient lights
Coffee preparation & ambient lights
The machine has 6 coffee preparation lights per group (3 each
side) that point directly to the coffee preparation area of each
group. It also has 2 ambient lights per group, located closer to
the panel (see Figure 1). Both options are configurable (it is not
possible to select different options for each group).
Coffee preparation & ambient lights mode
The ambient lights are on by default when the machine is in ope-
ration. The coffee preparation lights, on the other hand, light up
when a coffee is made in that group. As an alternative, the am-
bient lights can be set to turn off, and the coffee preparation
lights can be set to always stay on.
Programming coffee preparation lights
1. Disconnect the machine using the main switch.
2. Turn on the machine using the main switch, and wait until the long coffee touch button light in the left group head turns off.
3. Press and keep pressing the short coffee button and the continuous coffee button (figure 2).
4. When the short coffee, the 2 short and the continuous coffee in the left group head light, the machine will enter in the general light
programmation mode (the right touch pad will light but it has no functionality in this mode).
5. Press the continuous coffee button of the left group (figure 3) (it is not possible to select different modes for each group).

If it turns off, the coffee preparation lights will remain off until a service is started, in which case they will light up in that group.

If it turns on, the coffee preparation lights will always remain on.
6. To confirm the chosen selection, please turn off the machine and turn it on again. The changes are saved automatically.
Press and keep pressed the short coffee & the conti-
nuous coffee button.
Programming ambient lights
1. Disconnect the machine using the main switch.
2. Turn on the machine using the main switch, and wait until the long coffee touch button light in the left group head turns off.
3. Press the short coffee button in the left group until the touch button pad lights turn on & off. At that moment, the machine changes
the ambient lights configuration. If they were configured to be turned off, the will be configured to turn on and vice versa.
4. The machine will restart automatically with the new configuration saved. If you want to revert the changes, please repeat steps 1-
3.
Ambient lights
Press the continuous coffee button to switch between
the coffee preparation lights mode
Figure 2
25
Figure 1
Coffee preparation
lights
Figure 3
EN