Ibiza Light IBIZA400RGB Manual De Instrucciones página 4

Channel 6
Vertical
move
Zoom(+/-)
Channel 7
pattern size
Channel 8 Colour
selection
Colors
Channel 9
moving
Axis Y
Channel 10
rotation
Axis X
Channel 11
rotation
Axis Z
Channel 12
rotation
Motor
Channel 13
resetting
When the channel 2 is set to static pattern for manual (0--34)
only, the following channel is valid.
☆ Please clean the lens regularly. Do not do it using the wet cloth or other
chemical. the clean times is depend on the using frequency and
surrounding condition; it is recommended that should be cleaned every 20
days;
☆ Please clean the lighting surface and engine outlet regularly.
☆ Be sure that there is no flammable or explosive subject nearby. The least
distance is 0.5 meters. at the same time, keep more than 15cm between
the wall and laser lighting;

Power off before installation or maintenance;

The danger class of this laser lighting is CLASS 3 B. it's dangerous for
observing laser. The safe minimum distance is 13cm,the safe maximum
© Copyright Lotronic 2015
191-220 From right to left move
221-255 Right and left in-phase move
1~160 Manual
161~190 From down to up
191~220 From up to down
221~255 Up and down in-phase move
0-255 pattern size change/zoom in or out
0-17 RGB
18-35 Red
36-53 Red + Green (yellow)
54-71 Green
72-89 Green + Blue (cyan)
90-107 Blue
108-120 Blue + Red (pink)
121-136 7 colors in section
137-199 7 colors in section + flowing
200-255 Color changing by sound
0-255 From slow to fast
Axis Y rotation
0-255
Axis X rotation
0-255
Axis Z rotation
0-255
0-199 No resetting
200-255 XY motor resetting
Maintenance
Warning
4