Data On Serial Plate; Trouble Shooting - Nussbaum TC 355 Manual De Instrucciones

ENGLISH • Instructions manual
The manufacturer's Serial plate is fixed on the back of the machine.
If gives the following information:
1- Manufacturer information
2-
Model
3-
Serial number
4-
Phases
5-
Voltage requirements
6- Frequency
7-
Rated draw
8-
Power absorbed
9-
Working pressure
10-
Weight
11- Year
PROBLEM
When the pedal (1, Fig. L) is pressed the table top does not turn.
CAUSES
1) The power plug is not inserted.
2) No power from the mains electric supply.
REMEDIES
1) Insert the plug correctly in its socket.
2) Reset the mains electric supply.
PROBLEM
When one of the following controls is used:
- turntable pedal (5, Fig. L); - bead breaker pedal (3, Fig. L); - rotation arm
pedal (7, Fig. L); - control handle (9, Fig. L); - hook control lever (17, Fig. L);
there is no movement.
CAUSES
1) No compressed air supply to the system.
2) Compressed air hose is crimped or crushed.
REMEDIES
1) Check and correct the compressed air supply source.
2) Check and correct any hose defects. Replace hose if damaged.
WARNING:
If, inspite of the above mentioned indications the
tyre changer doesn't work properly, do not use it
and call for technical assistance.

17. DATA ON SERIAL PLATE

17. TROUBLE SHOOTING

37
2
5
7
8
6
4
9
10
9
10
16
12
6
2
7
5 1
3
1 11
3
17
11
8
4
14
13
L
TC 355 - Liga C 253