backdraught shutter opens freely and has
not being damaged in transit. Connect
the electrical wiring as set out below.
Electrical connection
The SILENTUB is an extractor designed
for a single phase supply, with voltage
and frequency as indicated on the rating
plate
of
the
manufactured
with
insulation
(Class II) and therefore they do not need
an earth connection.
The electrical installation must include a
double
pole
switch
clearance of at least 3 mm.
Fig.2: Switching the extractor through the
light switch.
Fig.3: To switch the fan through an
independent switch.
Maintenance
- Before
manipulating
make sure it is disconnected from the
mains supply even if it has previously
been
switched
possibility of anyone else connecting it
while it is being manipulated.
- The
apparatus
inspected. These inspections should be
carried
out
bearing
machine's working conditions, in order
to avoid dirt or dust accumulating on
the propeller, turbine, motor or grids.
This
could
perceptibly shorten the working life of
the ventilator unit.
- While cleaning, great care should be
taken not to unstable the propeller or
turbine.
- All maintenance and repair work should
be carried out in strict compliance with
each
country's
regulations..
After Sales Service
We recommend you not to try to
dismantle or remove any other parts than
those mentioned as any tampering would
automatically cancel the S&P guarantee.
unit.
The
units
double
electrical
with
a
contact
the
ventilator,
off.
Prevent
must
be
regularly
in
mind
be
dangerous
current
If you detect any fault, contact your S&P
dealer.
Recycling
EEC
Standards,
responsibility we should assume with future
generations in mind, oblige us to recycle all
the materials we can. Therefore, please
are
deposit all left-over material and packaging
in their corresponding recycling containers
and hand in the replaced machines to the
nearest handler of this type of waste
product.
S&P
reserves
specifications without notice
the
the
and
safety
together
with
the
right
to
the
alter