Fracarro SIG9606 Instrucciones De Uso página 20

6.3 CHANNEL SETUP MENU - PROGRAMMING THE RECEIVERS
From the initial menu, you can enter the channels' configuration menu by pressing the
the cursor is on the CHANNEL SETUP row.
Select the receiver to program and then gain access to the input, output and aux menu.
See chapter 6.4, 6.5 and 6.6 for details on the parameters to be set.
CHANNEL SETTING
FUNCTION "MODULE SEARCH"
TO BE USED WHEN CHECKING
IF THE MODULES
ARE WORKING PROPERLY
(see page 25)
COPIES THE PARAMETRES
OF ONE CHANNEL TO
ANOTHER (see page 25)
HARDWARE RESET
OF ONE OR ALL THE
CHANNELS (see page 25)
CHANNEL 1
CHANNEL 6
SCAN MODULES
MODULE SEARCH
COPY
COPY FROM ...
CHANNELS
RESET MODULE1
0
INPUT
INPUT DATA SETTING
OUTPUT
OUTPUT DATA SETTING
INPUT SIGNAL
MEASURES
READING MEASURES
CHANNELS
FOUND
PASTE ON ...
MODULE 6
WAIT...
key when
ALL CHANNELS