Semilac UV LED 36 W Manual Del Instrucciones página 3

Use only AC adapters intended for this device. Do not use voltages
other than those indicated on the device. This equipment can be
used by children at least 8 years of age and people with reduced
physical, mental capabilities, and those who lack of experience and
knowledge, if supervision or instruction concerning the use of
equipment in a safe manner will be ensured, so that the associated
threats were understandable. Children should not play with the
equipment. Children should not be allowed to perform the cleaning
and maintenance of equipment.
PACKAGE CONTAINS
UV LED lamp Semilac (x1)
AC Adapter for UV LED lamp Semilac (x1)
Operation Manual (x1)
PARTS DESCRIPTIONS
1. Time 30 s
2. Time 60 s
3. Time 99 s low heat mode
4. Digital display
5. Infrared sensor
GENERAL INSTRUCTION
• The intended use of the lamp is curing hybrid, UV gel and acrylic-gel nail products. The UV LED lamp is programmed with curing
times ensuring thorough and complete curing of each layer of hybrid, UV gel and acrylic-gel nail products.
• Connect AC Adapter.
• A single push of a particular mode button (30 s, 60 s, 99 s) will activate that mode. A second push of the mode button will turn off
that mode. The lamp additionally features a motion sensor which activates the last active time mode after inserting a hand or foot.
SPECIFICATIONS
Size: 206x118x70 mm
N.W.: 0,2 kgs
UV Wavelength: 365 nm + 405 nm
Adapter Input: 110-240 VAC
Adapter Output: 12 VDC / 2 A
Power: 36 W (max)
CHARACTERISTICS
• Curing times: 30, 60 seconds.
• Low heat mode: 99 seconds.
• Motion sensor.
• 21 LEDs.
• Digital display.
• No need to change LED bulbs.
• The lamp can be also used to feet.
• Ergonomic construction of the lamp ensures comfort, and the small size of it allows to spare a lot of place.
• High efficiency: 50 000 working hours.
SAFETY OPERATION INSTRUCTION AND WARNINGS
• Power indicator of lamp indicates a total LEDs rated power emitting UV radiation.
• Do not let any fragment, water or other kind of liquid get into device to avoid any fault of the lamp.
• Protect the device for water contact. Do not use it in rooms with humid environment (e.g. bathrooms or near to shower).
• If you do not use the lamp for long time switch off the lamp and plug out the plug from the power source.
• If the adapter is damaged send it to professional maintenance department or similar unit for repairing to avoid any potential risk.
EN 3