Fitting / Installation - GUTMANN VIENTO Instrucciones De Montaje

Fitting / Installation

1. Remove the furniture drawers or remove the front of the kitchen unit.
2. Check base cut-out for dimensions and flatness and adjust if necessary.
3. Insert the VIENTO hob extractor. Ensure that the gasket is seated correctly.
Observe and compensate for height differences. Here the highest caution is
required - danger of breakage !
4. Align the hob, fill the joint (e.g. Novasil® or Ottoseal®) and smooth.
5. Electrical connection by qualified personnel.
Switch off assigned circuit breakers in the fuse distribution box !
•
• Connect the hob - make sure that the strain relief is firmly seated !
EN
25