Maintenance - Gymna VACO 200 Manual De Usuario

The inspection is successful if all inspection items are passed.
Repair all faults on the equipment before the equipment is put back into
operation.
By comparing the registered measurement values with previous
measurements, a possible slowly-deteriorating deviation can be
ascertained.
5.2

Maintenance

Component
Vaco 200 unit
Vacuum
electrodes
Sponges
Vacuum hoses
and water
reservoir
Accessories that come in contact with the body of the patient
must be washed with pure water after the disinfection to
prevent allergic reactions.
5.2.1 Cleaning the Vaco 200 unit
1. Switch the equipment off.
2. Clean the device with a lightly moistened soft cloth.
No liquid may enter the device.
5.2.2 Cleaning the vacuum electrodes
1. Clean the vacuum electrodes (metal electrodes and rubber suction
cups) in a non-aggressive soap solution or in a 70% alcohol
solution.
2. Rinse the vacuum electrodes thoroughly with water.
3. Dry the vacuum electrodes.
5.2.3 Cleaning the sponges for vacuum electrodes
1. Rinse the sponges thoroughly with water or clean the sponges with
a 70% alcohol solution.
2. Rinse the sponges thoroughly with water.
Vaco 200
Check
Cleaning. See §5.2.1.
Cleaning. See §5.2.2.
Cleaning. See §5.2.3.
Cleaning. See §5.2.4.
18
Frequency
If necessary
After every treatment
After every treatment
Weekly