SICE S 52A Manual De Instrucciones página 45

TUBED TIRES: When the first bead is completely on the tire, continue rotating the tire until the valve stem is at
bottom dead center. Install the tube and continue with the directions below.
Remove clamp and reposition to the left of the bead roller. This creates a traction point for the un-mounted bead. Move
bead roller into position.
Rotate wheel clock-wise until bead is mounted completely on wheel. This should be completed within one full rotation.
WARNING:
Occupational Safety and Health Administration Standard 1910.177 requires tubeless and tube-type medium and large
truck tires be inflated using an OSHA-approved restraining device (e.g. safety cage) or barrier, and using a clip-on air
chuck with a pressure regulator and an extension air hose.
S 52A Operator's Manual
Do NOT inflate tire on tire changer. The tire changer is not an approved restraining device or
barrier to provide protection during inflation.
45