Rear Panel - Sunstech TLXRI2280HD Manual De Instrucciones

CONTROL BUTTONS AND TERMINALS

REAR PANEL

LINE IN
Headphone Jack: connect to your headphone.
1
RF Input Socket: Connect antenna or cable 75 ohm coaxial to receive TV signal.
2
LINE IN (VGA Audio) Terminal: Connect it to the audio output terminal of PC.
3
Coaxial output, connecting to coaxial input of your amplifier.
4
S-VIDEO Terminal: Connect it to S-Video output terminal of DVD or other equipment.
5
YPbPr Component Video Input Terminals: Connect them to the YPbPr component output
6
AUDIO-IN Connectors: Connect to the audio output of a DVD player or other equipment with
7
Video input: Connect to the AV output of a DVD player or other equipment.
8
SCART Connector: Connect your AV system using a SCART lead.
9
PCMCIA CARD SLOT: This function allows you to watch some pay services. If you remove the CI
10
(common interface) module, you can't watch the pay services. When you insert the module into the
card slot, you can access the module menu. To buy a module and smart card, contact your dealer.
Avoid regularly removing and inserting the CI module. When the LCD TV is turned on after inserting
the CI module, you often won't be able to hear the sound and there may be problems with the picture.
This function may not be available, depending on the country you are in.
VGA Input Terminal: Connect it to the D-Sub 15 pins analog output connector of the PC with
11
USB Input Connector: Connect it to the USB.
12
HDMI1/2 Input Connectors: Connect it to the HDMI of DVD or other external equipment.
13
VIDEO
R L
Pr Pb Y
VIDEO/S-VIDEO/YPbPr mode.
the VGA cable.
SCART
VGA IN
USB
CI IN
terminal of DVD or other external equipment.
6
HDMI1 IN HDMI2 IN