Switch Action; Functional Description; Speed Adjusting Dial - Makita 4350T Manual De Instrucciones

Symbols
The followings show the symbols used for tool.
volts
amperes
hertz
alternating current
no load speed
Class II Construction
revolutions or reciprocation per minute
FUNCTIONAL
DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function
on the tool.
Selecting the cutting action
► 1. Cutting action changing lever
This tool can be operated with an orbital or a straight
line (up and down) cutting action. The orbital cutting
action thrusts the blade forward on the cutting stroke
and greatly increases cutting speed.
To change the cutting action, just turn the cutting action
changing lever to the desired cutting action position.
Refer to the table to select the appropriate cutting
action.
Position
0

Switch action

1
► 1. Switch trigger 2. Lock button
CAUTION:
•
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.

Speed adjusting dial

For 4350CT, 4350FCT
1
► 1. Speed adjusting dial
4 ENGLISH
Cutting action
For cutting mild steel,
stainless steel and plastics.
Straight line
cutting action
For clean cuts in wood
and plywood.
Small orbit For cutting mild steel,
cutting action aluminum and hard wood.
For cutting wood and
Medium orbit
plywood.
cutting action
For fast cutting in
aluminum and mild steel.
Large orbit For fast cutting in
cutting action wood and plywood.
Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
Applications
2
1