Operation; Cleaning And Maintenance - cecotec Conga ROCKSTAR 200 VITAL Manual De Instrucciones

ENGLISH

4.OPERATION

Product assembly
Note: The product includes 2 screws to assemble the wall bracket.
Install the battery in the vacuum cleaner's main body by aligning it with the guides on the
main body and sliding it down.
Introduce the vacuuming tube in the main body until a click is heard, indicating it is properly
fixed.
Attach the suction base with the brush to the other end of the vacuuming tube.
Select the desired brush you want to use depending on the surface to clean, the Cepillo
Jalisco brush or the multifunctional brush.
The Cepillo Jalisco brush is especially designed to clean hard floors, but can be used
efficiently to clean any type of surface, such as soft floors.
The multifunctional brush made of silicone and bristles is ideal for cleaning carpets and pet
hair.
To change the brush, press the side brush release button, remove the one in use and
introduce the new one.
Fig. 3.
Use the power switch on the handle to turn the device on or off.
Press the trigger on the handle to activate the desired power level.
Handheld vacuum cleaner
Select the desired accessory according to the area or object that is going to be cleaned and
insert it directly in the main body.
Dust tank
Rotate the dust tank and remove it from the main body.
Battery charging
The battery indicator will turn on red when battery is low. When this happens, connect the
power adapter to the battery and to the power supply.

5.CLEANING AND MAINTENANCE

Do not use abrasive scouring pads, powders or cleaners to clean the product.
Use a soft, dampened and clean cloth to clean the product's outer housing.
ROCKSTAR 200 VITAL 15
05498_Conga RockStar 200 Vital_Manual_YV_01191111.indd 15 12/11/19 13:55