Recalling The Memorized Channel Levels - Sherwood RD-6505 Instrucciones De Funcionamiento

RD-6505(G)_100311_RD-5503(g) 2010-05-03 오후 6:45 페이지 39
Memorizing the adjusted channel levels
• You can memorize the adjusted channel levels into
preset memory("REF 1", "REF 2") and recall the
memorized whenever you want.
1.
After performing the steps 1 ~ 3 in "Adjusting the
current channel level" procedure on page 38,
press the ENTER button.
• Then "1" of "REF 1" indication flickers.
2.
Press the CURSOR LEFT(◀)/RIGHT(▶)
buttons to select the desired preset memory,
then press the ENTER button.
• Each time the CURSOR LEFT(◀) or RIGHT(▶) button
is pressed, "REF 1" or "REF 2" is selected.
• The adjusted channel levels have now been
memorized into the selected memory.

Recalling the memorized channel levels

1.
Press the CURSOR UP(▲)/DOWN(▼) buttons
to select the "MODE ~ ".
• "CAL" may be displayed instead of "REF 1" or "REF 2".
2.
Press the CURSOR LEFT(◀)/RIGHT(▶)
buttons to select the desired one of REF 1 and
REF 2.
• Then the channel levels memorized into the
selected preset memory are recalled.
39